Description
Cleaner Indoor Air. H13 HEPA Filtration. Designed for Your MeacoDry Arete Dehumidifier.
Keep your MeacoDry Arete dehumidifier performing as an effective air-cleaning appliance with the MeacoDry Arete H13 HEPA Replacement Filters - Pack of 3. Designed for compatible Arete One and Arete Two 18L, 20L and 25L dehumidifiers, these replacement filters help capture fine airborne particles, including dust, pollen, pet dander and mould spores.
The H13 HEPA filter works alongside the standard dust filter already fitted to your dehumidifier, providing two stages of filtration to help improve indoor air quality.
Supplied in a convenient pack of three, these filters are ideal for keeping replacements ready throughout the year. Meaco recommends replacing the HEPA filter approximately every three months, depending on use and environmental conditions.
H13 HEPA Filtration for Cleaner Indoor Air
The MeacoDry Arete H13 HEPA filter is designed to provide enhanced air cleaning when fitted to a compatible Arete dehumidifier.
It helps capture a range of airborne particles, including:
- Household dust
- Pollen
- Pet dander
- Mould spores
- Dust mite particles and allergens
- Other fine airborne particulates
This makes it a practical choice for households with pets, seasonal pollen concerns or those who want additional particle filtration alongside humidity control.
High-Efficiency H13 Filtration
These replacement filters use H13 HEPA filtration, designed to capture very fine particles from the air passing through the filter.
Meaco describes the filters as medical-grade H13 HEPA filters and specifies high particle-retention performance at a particle size of 0.3 micrometres (μm).
The supplied product information quotes two different efficiency figures, 99.75% and 99.95%. For this reason, the listing identifies the confirmed H13 filter classification without presenting either conflicting percentage as a definitive specification.
Two Stages of Filtration
The H13 HEPA filter is designed to be used in addition to the standard dust filter supplied with your MeacoDry Arete dehumidifier.
Together, these provide two stages of air filtration:
- Standard dust filter: The dehumidifier's existing first-stage filter.
- H13 HEPA filter: Additional filtration for finer airborne particles.
This combination allows your compatible Arete appliance to provide both dehumidification and enhanced air-cleaning functionality.
Use Your Arete as an Air Purifier
Compatible MeacoDry Arete dehumidifiers offer a dedicated air purification mode, allowing you to use the appliance for air cleaning even when you do not need to reduce humidity.
With the H13 HEPA filter fitted, you can take advantage of this functionality to help remove airborne particles from the room.
Always follow the operating instructions for your specific Arete model.
Compatible with MeacoDry Arete One & Arete Two
These H13 HEPA replacement filters are designed for the following 18L, 20L and 25L MeacoDry Arete models:
- MeacoDry Arete One 18L Dehumidifier and Air Purifier (Costco exclusive)
- MeacoDry Arete One 20L Dehumidifier and Air Purifier
- MeacoDry Arete One 25L Dehumidifier and Air Purifier
- MeacoDry Arete Two 18L Dehumidifier and Air Purifier (Costco exclusive)
- MeacoDry Arete Two 20L Dehumidifier and Air Purifier
- MeacoDry Arete Two 25L Dehumidifier and Air Purifier
Important: This pack is intended for the compatible 18L, 20L and 25L models listed above. Compatibility with other Arete capacities or different Meaco dehumidifier ranges is not confirmed.
Convenient Pack of Three Replacement Filters
Each purchase includes three H13 HEPA replacement filters, giving you a convenient supply for ongoing air purification.
Meaco recommends replacing the HEPA filter approximately every three months to maintain effective air-cleaning performance.
Based on this recommended interval, one pack provides approximately nine months of replacement filters, although the actual replacement frequency may vary with usage and indoor air conditions.
Ideal for Homes with Pets & Airborne Allergens
The H13 HEPA option is particularly useful when your priority is capturing fine particles rather than removing household odours.
It can help reduce airborne pet dander, pollen, dust and other particulates circulating through the appliance.
For homes where cooking smells, other odours or volatile organic compounds (VOCs) are the main concern, Meaco also offers an alternative active charcoal filter.
HEPA or Active Charcoal: Which Filter Should You Choose?
Meaco offers two replacement filter options for compatible Arete dehumidifiers, each designed for different air-cleaning priorities.
- H13 HEPA filter: Designed primarily to capture fine airborne particles such as dust, pollen, pet dander and mould spores.
- Active charcoal filter: Designed primarily to help reduce household odours and certain VOCs.
You can choose the filter type that best suits your home and switch between the two options as your needs change.
Both are optional additions to the standard dust filter. They are alternatives rather than a requirement to install both replacement filter types at the same time.
Designed Specifically for Compatible Arete Models
These replacement filters are designed to fit the compatible MeacoDry Arete One and Arete Two models listed above.
Meaco states that the H13 HEPA filter for this size range is 75% larger than the filter used in its Low Energy range, providing a larger filtration area.
Using the correct filter helps ensure the accessory fits and operates as intended with your appliance.
Important Information About HEPA Filter Use
Meaco advises that fitting the H13 HEPA filter may slightly increase operating noise and reduce water extraction efficiency.
This is a normal trade-off associated with the additional filtration resistance.
If your main priority is maximum moisture extraction rather than air purification, consult your appliance's instructions for the most suitable operating arrangement.
Filter Materials & Disposal
The filters are manufactured using polypropylene and polyethylene terephthalate (PET).
According to Meaco, these H13 HEPA filters cannot be recycled because of the nature of the product.
Replace used filters in accordance with the manufacturer's instructions and dispose of them through an appropriate general waste route where locally permitted.
Technical Specifications
| Brand | Meaco |
| Product Range | MeacoDry Arete |
| Product Type | Replacement HEPA Air Purification Filter |
| Filter Classification | H13 HEPA |
| Pack Quantity | 3 Filters |
| Compatible Range | MeacoDry Arete One & Arete Two |
| Compatible Capacities | 18L, 20L & 25L |
| Filtration Purpose | Fine Airborne Particle Capture |
| Examples of Particles | Dust, Pollen, Pet Dander & Mould Spores |
| Filtration Arrangement | Used Alongside the Standard Dust Filter |
| Air Purification Mode | Supported by Compatible Arete Appliances |
| Recommended Replacement | Approximately Every 3 Months |
| Approximate Supply Duration | 9 Months at Recommended Replacement Interval |
| Materials | Polypropylene & Polyethylene Terephthalate |
| Recyclable | No, According to Meaco |
| Effect on Dehumidification | May Slightly Reduce Water Extraction Efficiency |
| Effect on Noise | May Slightly Increase Operating Noise |
What's in the Pack?
- 3 x MeacoDry Arete H13 HEPA Replacement Filters for Compatible 18L, 20L and 25L Models
Please note: This product contains replacement filters only. The MeacoDry Arete dehumidifier is sold separately.
Why Choose MeacoDry Arete H13 HEPA Replacement Filters?
The MeacoDry Arete H13 HEPA Replacement Filter 3-Pack provides a convenient way to maintain the air-cleaning performance of your compatible dehumidifier.
Designed to capture fine airborne particles, these filters are useful for households looking to reduce circulating dust, pollen, pet dander and other particulates.
They work alongside the appliance's standard dust filter, and compatible Arete models can also be operated in a dedicated air purification mode when dehumidification is not required.
With three filters included and an approximate three-month replacement recommendation, this pack makes ongoing maintenance simple.
MeacoDry Arete H13 HEPA Filter FAQs
Which Meaco dehumidifiers are these H13 HEPA filters compatible with?
They are compatible with the MeacoDry Arete One and Arete Two 18L, 20L and 25L dehumidifiers, including the listed Costco-exclusive 18L versions. Compatibility with other models is not confirmed.
How many HEPA filters are included?
Each pack contains three H13 HEPA replacement filters.
How often should I replace my MeacoDry Arete HEPA filter?
Meaco recommends replacing the H13 HEPA filter approximately every three months. Actual replacement frequency may vary depending on how often the appliance is used and the air conditions in your home.
What is the difference between the HEPA and charcoal filters?
The H13 HEPA filter is designed to capture fine airborne particles such as dust, pollen and pet dander. The active charcoal filter is intended primarily to help reduce odours and certain VOCs. You can switch between the two filter types depending on your needs.
Will fitting the HEPA filter affect dehumidifier performance?
Meaco advises that using the H13 HEPA filter may slightly increase operating noise and reduce water extraction efficiency because of the additional filtration resistance.